فروش
ماژول رگولاتور DC به DC افزاینده ۶۰۰ وات با قابلیت تنظیم جریان خروجی as Smart Object-1

ماژول رگولاتور DC به DC افزاینده ۶۰۰ وات با قابلیت تنظیم جریان خروجی

516,000 ریال

در انبار موجود نمی باشد

اضافه به لیست مورد علاقه
  • توضیحات
  • اطلاعات بیشتر
  • نظرات (0)

توضیحات محصول

جهت ترجمه متن به فارسی اینجا کلیک کنید

 

 

Specification:
Input voltage: 12V-60V
Input Current: The maximum input current 15A
Output voltage: 12V-80V continuously adjustable
Output Current: Maximum output current 10A (adjustable)
Output power: active power P = input voltage V * 10A
Conversion efficiency: up to 95% (input voltage, current; output voltage and current affect the conversion efficiency)
Short circuit protection: Fuse
Module size: 73 * 51mm
Weight : 270g

detailed description:
۱٫ Product chronological materials, using a custom radiator, specifications: radiator floor thickness 5mm, tooth height 21mm, length 85mm, width 63mm, fixed above the radiator booster board, rationalized design, integrated design radiator and booster plate , user-friendly direct use, using long screws fixed directly to use.
۲٫ ۲۷mm Kool using magnetic inductance ring, 1mm double wire wound inductors, high-quality filter capacitor, enter a 1000uF 63V electrolytic capacitor, the output of two 470uF100V electrolytic capacitors, boosting power output and better quality, on-board power switch, power indicator light, with voltage regulation, current regulation potentiometer so that the output is more convenient, you can always adjust the output voltage, current size, use 8500 input and output terminals, through a strong current capability to ensure long and reliable operation.

Applications:
۱٫  DIY an output adjustable vehicle power supply, only need to enter the access 12V power supply, output voltage (14V-80V ) free continuously adjustable, but the output voltage can not be lower than the input voltage.
۲٫  Universal car laptop power supply. 12V power input connected to the output regulation voltage into the notebook needs to work.
۳٫ boost charger, you can use the 12V power supply is higher than 12V battery charging, for example, 24V battery, and the charging current can be adjusted.
۴٫ Electronic equipment supply, as long as the voltage to the voltage regulator and the current needs of all can not exceed the rated current working properly.
۵٫ System-level power supply before, when doing a project, the input is 12V-18V, 24V power supply system board needs a lot about and the power of ordinary DC-DC module power is too small, then this module will be your best choice, without debugging directly on the machine can work easily achieve high efficiency power boost.

Module Application examples:
۱٫ Input voltage 12V Current 8.73A, boost output voltage 20V current 5.0A, module efficiency of about 86%, the output voltage, current stability
۲٫ Input voltage 54V Current 13.5A, 58V output current of 12A, use 5Ω۱Kw resistance as the load test, the efficiency is 95%
۳٫ Module Output 965W test chart , using 5Ω۱Kw resistance as the load test

اطلاعات بیشتر

وزن 100 g
مدل

ماژول رگولاتور DC به DC افزاینده 600 وات با قابلیت تنظیم جریان خروجی

گارانتی

7 روز مهلت تست سلامت

حدود وزن بسته بندی شده جهت ارسال

100 گرم

نقد و بررسی ها

هیچ دیدگاهی برای این محصول نوشته نشده است.


اولین نفری باشید که نظری را ارسال می کنید برای “ماژول رگولاتور DC به DC افزاینده ۶۰۰ وات با قابلیت تنظیم جریان خروجی”